ESKIMO Hazardous Area HVAC-RESKIMO Hazardous Area HVAC-R
ID Contact

Our facilities

2 hectares of workshop and test facilities.

Design, fabrication, load testing, VPI and Ex repair on one site in Curug, Tangerang – close to Jakarta and Soekarno-Hatta airport.

Discuss a projectWhatsApp +62 813-1931-1988

Under one roof

What we have in-house

Fabrication

Fabrication

  • Press brake, shears, corner shear and rolling
  • Rotary draw bending for mild steel and copper
  • SMAW, GMAW, GTAW and laser welding; plasma and brazing
  • Spot and stud welding, punching, stamping and servo tapping
  • Milling, lathe, sand blasting, painting and winding ovens
  • Electrolytic plating and Heresite coil-coating line
Testing & capacity proof

Testing & capacity proof

  • Compressor benchmarking facility
  • Chiller load-running test pool
  • Air-conditioning load test and freezer test room
  • Coil leak-test pool and overpressure testing
  • Ingress protection (IP) and duct-leakage testing
  • Integrated inverter-system test facility
  • Multi-channel thermocouple logging and wireless refrigeration analysers
  • In-house training facility for client and partner sessions
Repair & overhaul

Repair & overhaul

  • Two-tank VPI autoclave – stators up to Ø1.1 m × ~3 m
  • Vacuum to 0.5–5 mbar, 4 bar impregnation, oven cure at 150 °C
  • 1-ton rotor balancer and laser shaft alignment
  • Veer stator core-loss tester and Electrom static winding analyser (surge, resistance, insulation)
  • Overpressure test rig for Ex d enclosures; in-house IP testing
  • Vibration and alignment analysers
  • Compressor & motor test bench with vibration and temperature monitoring (commissioning)

600 kVA diesel generator (50/60 Hz) plus 200 kVA grid supply, so units are tested at their site frequency.

Coil protection

Heresite coating, applied in-house

Offshore salt air destroys untreated coils. As a Heresite Certified Applicator we apply P-413 baked phenolic by full immersion and VR-514 air-dried phenolic by flow coat – on our own coils and on coils sent to us for refurbishment.

Location

Close to Jakarta, airports and ports

Our main workshop sits in the industrial area of Curug, Tangerang, with fast access to Soekarno-Hatta airport and the ports of Tanjung Priok and Merak. A satellite workshop at Bizhub 52 in Balikpapan supports clients in Kalimantan.

Map of ESKIMO locations in Indonesia

FAQ

Frequently asked questions

Can we witness a Factory Acceptance Test at your workshop?

Yes. The 2-hectare workshop in Curug, Tangerang is close to Jakarta and Soekarno-Hatta airport, and FATs are witnessed by client representatives.

How do you prove cooling capacity?

Ex HVAC packages, Ex split units, rental chillers and overhauled compressors are load-tested in-house – in the chiller test pool, AC load-test hall or compressor benchmarking facility – on generator power at 50 or 60 Hz.

Tell us about your site

Share the area classification, duty and schedule – an engineer replies within one working day.

Email sales@eskimo.co.id WhatsApp +62 813-1931-1988